Menu
Line Voltage: 120V to 240V AC
Frequency: 50Hz to 60Hz
Operating Temperature: -4° to 104° F (-20° to 50° C)
Storage Temperature: -22° to 140° F (-30° to 60° C)
Relative Humidity: 0 to 95% Non-Condensing
Current: 10 Amps DC x 3 Banks
Voltages: 12V
Chemistry: Lead-Acid and Lithium
Types: Wet, Gel, MF, CA, EFB, AGM, Lithium
Battery Capacity Range: Up to 230 Amp-Hours
Maintenance: All Battery Sizes
Consumption: 150 Watts (Max) X 3 Banks
Short-Circuit: Yes
Open-Circuit: Yes
Overheating: Yes
Overcharge: Yes
Spark-Proof: Yes
Reverse Polarity: Yes
Height: 8.11 Inches (206 mm)
Width: 10.51 Inches (267 mm)
Depth: 2.83 Inches (73 mm)
Weight: 13.43 lbs (6.2 kg)
DC Cable + Eyelet Length: 72 Inches (182cm)
DC Cable Size: 14 AWG
DC Fuse Size: 15 AMP MINI ® Blade Fuse
AC Cable Length: 72 Inches (182cm)
AC Cable Size: 18 AWG
Oil, gas, grease, water, chemical, UV, abrasion resistant
IP68
3-Year Limited Warranty
Introducing the all-new GENPRO10X3, a significant upgrade from our previous GEN3 model. This onboard marine battery charger is 19% smaller yet delivers 33% more power, positioning it as one of the most efficient and high-performing chargers we have ever produced. The GENPRO10X3 is a three-bank onboard battery charger rated at 30 amps (10 amps per bank) for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries.
The GENPRO10X3 provides the capability to independently charge and control each battery bank, with selectable charging modes that include 12V, 12V AGM, 12V Lithium, and 12V Repair Mode. It is designed to be compatible with all types of lead-acid and lithium-ion batteries. An integrated thermal sensor detects ambient temperature and adjusts the charge to prevent over-charging in hot climates and under-charging in cold climates, ensuring optimal battery health.
This advanced charger can handle batteries with voltages as low as 1 volt and features a new Force Mode, allowing users to manually initiate charging of completely dead batteries down to zero volts. It also automatically detects battery sulfation and acid stratification, restoring lost performance for stronger engine starts and extended battery life.
The GENPRO10X3 is more than just a trickle charger; it is an advanced battery maintainer that provides fully automatic, worry-free charging 24/7 without the risk of overcharging. Its simplified mounting system allows for quick and easy installation in any direction, including upside-down, and includes an integrated anti-vibration backing to minimize shock, vibration, and noise.
Fully sealed and waterproof, the GENPRO10X3 boasts an ingress protection rating of IP68. It has undergone rigorous life cycle testing, including thousands of hours underwater, to ensure its durability and reliability in the harshest conditions.
